The JLSG Telescopic Chute is a retractable, automated bulk material loading system designed for dust-free transfer of grain, cement, wheat, rice, and dry bulk solids from silos or hoppers into trucks, trains, railcars, and ships. It extends up to 7 meters, handles 50 to 1000 tons per hour, and operates with an intelligent level-sensing control system that automates the entire loading cycle, from descent to retraction.

What Is a Telescopic Loading Chute?

A telescopic loading chute, also referred to as a telescopic loading spout or retractable bulk loading tube, is an enclosed industrial device that transfers dry bulk materials from an elevated discharge point, such as a silo outlet or storage hopper, downward into a receiving container. The chute consists of nested, concentric telescoping sections that extend vertically to meet the truck bed, vessel hold, or railcar opening, and retract automatically once loading is complete.

The JLSG Series represents a high-automation version of this system, engineered for grain terminals, cement plants, feed mills, chemical processing facilities, and bulk logistics ports where dust control, loading precision, and operational continuity are critical requirements.

---

JLSG Series Telescopic Chute: Core Specifications

The JLSG retractable chute is available in four standard models. Each model is optimized for a specific capacity range and dust collection requirement:

1. JLSG-100: Loading capacity 50 to 100 T/H, power 0.75 to 3.0 kW, dust collector air volume 1200 m³/h, maximum chute length 7000 mm
2. JLSG-300: Loading capacity 200 to 300 T/H, power 1.5 to 3.0 kW, dust collector air volume 2000 m³/h, maximum chute length 7000 mm
3. JLSG-500: Loading capacity 400 to 500 T/H, power 2.2 to 4.0 kW, dust collector air volume 2800 m³/h, maximum chute length 7000 mm
4. JLSG-1000: Loading capacity 600 to 1000 T/H, power 3.0 to 5.5 kW, dust collector air volume 3500 m³/h, maximum chute length 7000 mm

Custom configurations are available depending on the material type, loading height, and site conditions.

How the JLSG Telescopic Chute Works

The loading process follows a fully automated, step-by-step sequence that eliminates manual intervention and minimizes dust generation at every stage:

1. Feeding: Bulk material flows from the silo outlet or storage hopper into the top inlet of the chute.
2. Extension: The telescopic sections descend automatically, extending until the discharge cone reaches the appropriate height above the truck, railcar, or ship hold.
3. Material transfer: Bulk solids flow through the sealed telescopic channel directly into the receiving container with controlled discharge speed.
4. Dust capture: Air-jet dust collectors draw dust-laden air upward through the return channel, trapping particulates before they can escape into the surrounding environment.
5. Level sensing: Built-in material level sensors continuously monitor the fill height inside the container and signal the drive unit to raise the chute proportionally as the material level rises, maintaining the optimal discharge gap.
6. Auto retraction: Once the container is full, the control system retracts the chute to standby position and sends an interlock signal to the PLC or central control system.

This fully enclosed loading cycle eliminates dust diffusion at the source, protecting both workers and the surrounding environment.

---

Технические параметры

---

Key Features and Technical Advantages

Intelligent Automation and Control

The JLSG chute integrates material level sensors with an automatic up-and-down motion system. Operators can switch between manual and fully automatic modes depending on the loading scenario. The system provides electrical interlock signals and operational status outputs for integration with centralized PLC control panels, making it suitable for large-scale automated grain terminals and industrial bulk handling facilities.

Explosion-Proof and Dust-Resistant Operation

High-dust environments such as cement plants, grain silos, and chemical powder facilities demand equipment that can operate safely under combustible or abrasive conditions. The JLSG chute uses anti-explosion control cabinets and European-grade speed reducers to ensure reliable, long-term performance without risk of spark generation or equipment failure in hazardous atmospheres.

Integrated Dust Collection System

Each model includes a dedicated air-jet dust collection system with airflow volumes ranging from 1200 to 3500 m³/h depending on model size. During material discharge, dust-laden air is drawn upward through the space between the inner loading tube and the outer telescopic sleeve, filtered by the dust collector, and discharged clean. This design meets industrial environmental protection standards and prevents fugitive dust emissions into the loading bay.

Compact Telescopic Structure

The maximum extended length of 7000 mm accommodates a wide range of truck bed heights, railcar openings, and vessel holds. When retracted, the chute occupies a small vertical footprint, making it practical for retrofit installations in existing silo facilities with limited overhead clearance.

High-Capacity Industrial Loading

The JLSG series supports loading capacities from 50 T/H for small feed mills up to 1000 T/H for large grain terminals or cement bulk loading stations. The drive system and structural frame are engineered for continuous duty operation, meaning extended operational periods without maintenance interruption.

Industries and Materials Supported

The JLSG telescopic silo loading chute is designed to handle a broad range of dry bulk solids across multiple industries:

Grain and Agriculture:

• Wheat, rice, corn, soybeans, barley, rapeseed
• Animal feed pellets, flour, seeds

Construction and Building Materials:

• Portland cement, fly ash, gypsum, limestone, sand, clinker

Химическая промышленность:

• Soda ash, PVC powder, alumina, bentonite, kaolin, calcium carbonate

Logistics and Port Operations:

• Bulk truck loading, railcar loading, ship and barge loading
• Silo-to-container discharge and warehouse loading

This versatility across granular, powdery, and semi-abrasive materials makes the JLSG retractable chute one of the most broadly applicable bulk loading solutions available for industrial silo discharge operations.

Why Use a Telescopic Chute Instead of an Open Discharge Spout?

An open spout or fixed pipe discharge creates several problems in industrial loading: uncontrolled dust release, imprecise fill levels, material spillage, and constant operator attention. A telescopic loading chute solves all of these:

• Dust is contained inside the sealed telescoping cavity and captured by the integrated air-jet collector, eliminating airborne particulates.
• Material level sensors prevent overfilling and reduce spillage losses.
• Automatic retraction removes the chute from the loading zone without manual handling.
• PLC integration allows the loading process to be monitored and managed from a remote control station.
• The enclosed loading channel protects material quality during transfer, which is especially important for food-grade grains and sensitive chemical powders.

For operations that must meet environmental compliance requirements or that handle hazardous powders, the JLSG telescopic chute provides the control and containment that fixed or flexible open discharge systems cannot offer.

Installation and Integration

The JLSG chute mounts directly below the silo outlet or hopper discharge flange. The top inlet connects to the existing discharge point, and the control cabinet interfaces with the facility’s PLC system through standard interlock and status signal terminals. Installation requires minimal structural modification, and the compact retracted profile means the system fits within the vertical clearance of most existing silo loading bays.

For new installations, the chute is typically specified alongside the silo design to ensure correct positioning above the truck loading lane or railcar loading track.

Frequently Asked Questions

What materials can a telescopic silo loading chute handle?

The JLSG chute handles most dry bulk solids including grain, wheat, rice, cement, fly ash, soda ash, PVC powder, alumina, bentonite, and similar granular or powdery materials. It is not designed for wet, sticky, or high-moisture materials.

What is the maximum loading height for the JLSG chute?

The telescopic chute extends up to 7000 mm from its mounting point, which covers the range of standard bulk truck heights, railcar openings, and small vessel holds.

Can the JLSG chute be used for ship loading?

Yes. The JLSG series is suitable for ship and barge loading where the hold opening falls within the 7-meter extension range. For deeper vessel holds requiring 10 meters or more, extended-length models or dedicated ship loader chutes may be required.

Is the control system compatible with existing PLC infrastructure?

Yes. The JLSG control cabinet provides standard electrical interlock signals and operational status outputs that connect to Siemens, Allen-Bradley, Omron, and other common PLC platforms.

Does the chute work in explosive or high-dust environments?

Yes. The JLSG chute uses explosion-proof control cabinets and antistatic components suitable for ATEX-classified zones where combustible dust concentrations may be present.

Summary

The JLSG Telescopic Chute for Silo Loading is a fully automated, dust-free bulk material loading system built for continuous industrial use. It combines intelligent level-sensing automation, integrated dust collection, explosion-proof components, and a compact retractable structure to deliver reliable, high-capacity loading of grain, cement, powder chemicals, and other dry bulk solids into trucks, trains, railcars, and ships. With four standard capacity models ranging from 50 to 1000 T/H and a maximum extension of 7 meters, the JLSG series suits the full range of silo discharge and bulk transfer applications across agriculture, construction, chemical processing, and logistics.